The inner wire needs to be connected to one side of the small block, while the second wire should be connected to another side of the same block. You should separate the inner and outer wires. You next task is to connect a coaxial cable. Then put the bolt into this hole, install the antenna on top and use a nut to fix it. The hole needs to be big enough for a bolt to go through. In the center of another side make a hole. Then take a pipe and cut its one side by half. On the ends of the wire that are bent inwards install the connector block. This time you should measure the distance of 8 cm from sides to make the bends. The both edges should be also bent inwards at 90 degrees. Flatten the wire and bend it in a square-like shape: use pliers to bend it in the center at 90 degrees, then at the distance of 9 cm on both sides from the center of your wire, bend it once again at 90 degrees.

To create your own homemade signal booster with a view to overcome your cell phone signal problems, you will need the following materials: iron wire (0.35 – 0.4 m long), connector blocks (2 items), small bolt and nut, coaxial cable (10 m long), a water pipe (one piece) and one plastic container.įirst of all, we need to create an antenna.

Cell phone booster for home